The air-cooled condenser is a heat-dissipating device that is cooled by air for use in Freon refrigeration equipment. There are five main types of air-cooled condensers produced by our company: FNH type, FNV type, FNU type, FNVB type, TP type, FNH type adopts side blowing form, FNV type, FNVB type, FNU type, TP type adopts top The form of the hair dryer.
This series of products has the following characteristics:
1. The shell is made of high quality steel plate, the surface is sprayed, corrosion resistant and beautiful in appearance;
2. The coil tube adopts copper tube misalignment or parallel mode, and the mechanical expansion tube is used to make the copper tube and the fin tightly combined, and the heat exchange effect is good;
3. The product has passed the air tightness test of 2.5Mpa and the system sewage treatment;
4. Applicable to R22, R134a, R404a, R407c and other refrigerants;
5. FNH type condensers adopt high-winding and low-speed motors, which have low noise and beautiful appearance, and can be widely used in refrigeration equipment with high noise requirements;
6. FNV type condenser has large windward surface and good heat exchange effect, and is equipped with low noise motor, which can be widely used in large condensing units.
Product model and corresponding parameters:
| Specification model | The main parameters | Fan motor parameter power | Interface pipe diameter | Weight | ||||||
| Exhaust heat | Condensation area | Blade diameter | Quantity | Total air volume | Power | Voltage | import | Export | ||
| W | ㎡ | Φmm | N | m³/h | W | V | Φmm | Φmm | KG | |
| FNH-0.7/2 | 710 | 2.0 | 200 | 1 | 430 | 33 | 220 | 10 | 10 | 2 |
| FNH-1.2/3.4 | 1217 | 3.4 | 200 | 1 | 430 | 33 | 220 | 10 | 10 | 3 |
| FNH-1.4/4.0 | 1440 | 4.0 | 200 | 1 | 430 | 33 | 220 | 10 | 10 | 3.5 |
| FNH-1.6/4.4 | 1566 | 4.4 | 250 | 1 | 910 | 60 | 220 | 10 | 10 | 4 |
| FNH-1.9/5.2 | 1856 | 5.2 | 300 | 1 | 1530 | 75 | 220 | 10 | 10 | 5 |
| FNH-2.9/8 | 2864 | 8.0 | 300 | 1 | 1530 | 75 | 220 | 10 | 12 | 6 |
| FNH-3.0/8.4 | 3007 | 8.4 | 300 | 1 | 1530 | 75 | 220 | 10 | 12 | 7 |
| FNH-3.8/10.6 | 3816 | 10.6 | 300 | 1 | 1530 | 75 | 220 | 10 | 12 | 9.5 |
| FNH-3.6/10 | 3550 | 10 | 350 | 1 | 1800 | 90 | 380 | 16 | 12 | 9 |
| FNH-4.3/12 | 4296 | 12 | 350 | 1 | 1800 | 120 | 380 | 16 | 12 | 10 |
| FNH-5.4/15 | 5355 | 15 | 350 | 1 | 1800 | 120 | 380 | 16 | 12 | 11 |
| FNH-6.4/18 | 6408 | 18 | 400 | 1 | 3000 | 120 | 380 | 16 | 12 | 13 |
| FNH-7.9/22A | 7876 | 22 | 400 | 1 | 3000 | 120 | 380 | 16 | 12 | 16 |
| FNH-10/27 | 9610 | 27 | 400 | 1 | 3000 | 120 | 380 | 19 | 16 | 20 |
| FNH-7.9/22B | 7876 | 22 | 350 | 2 | 3600 | 2x120 | 380 | 16 | 12 | 16 |
| FNH-10/28 | 9968 | 28 | 350 | 2 | 3600 | 2x120 | 380 | 19 | 16 | 27 |
| FNH-12/33 | 11880 | 33 | 350 | 2 | 3600 | 2x120 | 380 | 19 | 16 | 23 |
| FNH-13/36 | 12960 | 42 | 400 | 2 | 6000 | 2x120 | 380 | 22 | 19 | 27 |
| FNH-15/43 | 15036 | 52 | 400 | 2 | 6000 | 2x120 | 380 | 22 | 19 | 33 |
| FNH-17/48 | 16784 | 60 | 400 | 2 | 6000 | 2x120 | 380 | 22 | 19 | 37 |
| FNH-20/55 | 19907 | 70 | 400 | 2 | 6000 | 2x120 | 380 | 22 | 19 | 43 |
| FNH-21/60 | 21360 | 80 | 400 | 2 | 6000 | 2x120 | 380 | 22 | 19 | 45 |
| FNH-25/70 | 24640 | 100 | 450 | 2 | 9000 | 2x180 | 380 | 22 | 19 | 48 |
| FNH-28/80 | 28240 | 110 | 450 | 2 | 9000 | 2x180 | 380 | 28 | 22 | 53 |
| FNH-35/100 | 35400 | 120 | 400 | 4 | 12000 | 4x120 | 380 | 28 | 22 | 63 |
| FNH-42/120 | 42240 | 135 | 400 | 4 | 12000 | 4x120 | 380 | 28 | 22 | 71 |
| FNH-46/130 | 47799 | 155 | 400 | 4 | 12000 | 4x120 | 380 | 28 | 22 | 76 |
| FNH-55/150 | 55025 | 170 | 450 | 4 | 18000 | 4x180 | 380 | 28 | 22 | 90 |
| FNH-65/180 | 65500 | 180 | 450 | 4 | 18000 | 4x180 | 380 | 28 | 22 | 102 |
| FNH-72/200 | 72200 | 200 | 450 | 4 | 18000 | 4x180 | 380 | 28 | 22 | 109 |
